Telescopic Sliding Gates on the Gold Coast
A telescopic gate is a sliding gate split into two or more leaves that run on parallel tracks and stack behind each other when open. It opens a wide driveway with roughly half the fence line a single sliding gate needs.

When a telescopic gate makes sense
A standard sliding gate needs a clear run beside the opening about as long as the gate itself. On a lot of Gold Coast blocks that room is not there. A telescopic gate is usually the answer when:
- the driveway is wide, often a double or triple garage frontage
- the fence line beside the opening is short because of a letterbox, meter box, garden bed or side boundary
- a swing gate will not work because the driveway slopes or the house sits close to the street
With two leaves, the gate parks in a space a little over half the width of the opening. Three leaves bring that down to about a third.
How it works
The leaves sit on their own tracks, side by side. As the gate opens, the front leaf travels faster than the rear one and they finish stacked together beside the driveway. A top guide keeps both leaves upright and a link between them keeps them moving together, whether you open it by hand or with a motor.
Because there are two tracks, the footing across the driveway is a little wider than for a single sliding gate. We look at the concrete where the tracks will sit before anything is made.
Built to measure in aluminium
Telescopic gates suit aluminium well. The leaves are light, so the gate runs easily and a standard sliding motor can drive it. Each leaf is made to your opening in the same styles as our other gates:
- Horizontal slats for a clean modern frontage
- Vertical slats, which are harder to climb
- Angled louvres for privacy with airflow
- Privacy panels with no gaps
Colours come from the standard powder coat range, so the gate can match your fencing, side gates and window frames.
Manual or automatic
Telescopic gates can be fitted manual, but most people choose a motor because the gate covers a wide opening. We build them motor-ready and can fit the motor at installation or later. See gate automation for motors, remotes and safety beams.
What to have ready for a quote
Measure the width of the opening and the length of clear fence line beside it, note any slope, and take a photo from the street. Those three things tell us straight away whether a two or three leaf telescopic gate will fit.
Why choose us for telescopic gates
- Opens wide driveways with about half the run-off room
- Two or three leaves stacked on parallel tracks
- Made to measure in powder coated aluminium
- Light leaves that suit a standard sliding motor
- Site checked for track footing and clearance first
Telescopic Gates — common questions
How much room does a telescopic gate need?
A two leaf telescopic gate needs clear fence line of a little over half the opening width. A three leaf gate needs about a third. We confirm the exact figure when we measure your site.
Is a telescopic gate harder to automate?
No. The leaves are linked, so one sliding gate motor drives both. Because aluminium leaves are light, the motor does not need to be oversized.
Do telescopic gates need more maintenance?
There are two tracks and more rollers than a single sliding gate, so keeping the tracks clear of leaves and grit matters. Beyond that, the care is the same as any aluminium sliding gate.
Ready to plan your new gate?
Tell us about your project to request a free quote.
