Titan GatesCall 0499 280 634

Bi-Parting Sliding Gates on the Gold Coast

A bi-parting gate is a sliding gate split down the middle. The two leaves run on the same track and slide apart in opposite directions, so each side only needs room for half the opening.

Black aluminium bi-parting sliding driveway gate with two slat leaves sliding apart from the centre at a Gold Coast home

When a bi-parting gate makes sense

A single sliding gate parks on one side of the driveway and needs a clear fence line there about as long as the opening. A bi-parting gate shares that room between both sides. It is usually the right choice when:

  • the driveway is wide and there is some fence line on both sides of it, but not enough on either side for a single gate
  • the opening is symmetrical, with pillars or a feature wall either side, and you want the gate to match
  • you want the gate to open quickly, because each leaf only travels half the distance

If there is room on one side only, a telescopic gate is usually the better fit. If there is no straight run on either side, look at a sectional gate.

How it works

Both leaves sit on one continuous track set into a concrete footing across the driveway, each with its own rollers and top guide. When the gate closes, the leaves meet in the middle with a centre stop that keeps them lined up. When it opens, they slide away from each other and park behind the fence on each side.

Because the track runs the full width, the footing needs to be sound from one side of the driveway to the other. We look at the concrete before anything is made.

Built to measure in aluminium

The two leaves are made as a matched pair, so slats, rails and colour line up across the centre join. Popular styles include:

  • Horizontal slats for a clean modern frontage
  • Vertical slats, which are harder to climb
  • Angled louvres for privacy with airflow
  • Privacy panels with no gaps

Colours come from the standard powder coat range, so the gate can match your aluminium fencing and side gates.

Manual or automatic

Bi-parting gates can be fitted manual, but most are automated. Each leaf has its own sliding motor, and the two motors are paired to a single control board so they open and close together from one remote. We build the gate motor-ready either way. See gate automation for motors, remotes and safety beams.

What to have ready for a quote

Measure the width of the opening, measure the clear fence line on each side, note any slope, and take a photo from the street. That tells us whether a bi-parting gate will fit and where the motors can go.

Why choose us for bi-parting gates

  • Each side needs room for only half the opening
  • Two matched leaves meet neatly in the middle
  • Opens faster because each leaf travels half as far
  • Made to measure in powder coated aluminium
  • Twin motors paired to one remote when automated
Need bi-parting gates on the Gold Coast?
FAQs

Bi-Parting Gates — common questions

How much room does a bi-parting gate need?

Each side needs clear fence line of about half the opening width, plus a little extra for the posts and stops. We confirm the exact figures when we measure your site.

Does a bi-parting gate need two motors?

Yes, when it is automated. Each leaf gets its own sliding motor, and the two are paired to one control board so a single remote opens both together.

Bi-parting or telescopic: which is better?

It depends on where the room is. Bi-parting needs fence line on both sides of the driveway. Telescopic needs it on one side only, about half the opening long.

Ready to plan your new gate?

Tell us about your project to request a free quote.